Recent content by DRD

Here you go maybe this helps. Great dies by the way.. http://www.redding-reloading.com/tech-line-a-tips-faqs/143-seating-depth-variation

Great question. Take the die apart and look at the seating stem and I think you will answer your own question once you insert a bullet into the stem. Are you measuring OAL to the bullet tip, if so I would strongly consider measuring oal off the ogive as well if you are getting into jump and...

Well I think the warranty has been covered... Very good luck with both brands. Biggest difference is the MOA travel 75moa with the Leupy 30mm tube and 55moa with the Vortex. Same length, 1/4 clicks, Vortex a bit lighter (3oz). Really like the new reticles in the LH and has Razor glass. Really...

Yes good to hear. I'm a fixed blade guys and slight movement of rest (Ultrarests work great with little hashmarks) should bring impact points together unless there is a bigger problem. Glad you found it can drive a bowhunter nuts.

2nd for trail cam pro. We were (4 hunters in TX) using Moultire M880s. Only issue was battery life but no failures and good pics. Did not have good luck with the newer models and everyone switched to the newer brownings and happy so far. Better battery life and again good pics. What was...

Great looking rig. I'm sure you've shot Berger VLDs before, but if not look up the Bryan Litz article about finding a load per seating depth to extend the life of your barrel being a 6.5. Here is the link. Save a lot of time and ammo...

The best info I have seen on this topic of terminal performance by caliber, bullett, etc, etc is written by a guy named Nathan Foster at Terminal Ballistic Studies. Go there and find more info from a guy who has been there done that 1000's of times. Emailed him personally about a question like...

That's way too much. Possibly using a powder that is temperature sensitive???? Agree the ES/ should be no more than 20-30fps, especially with the extensive list of powders from Hodgdon or IMR (with Enduron) with low temperature sensitivity. Had good luck with H1000, H4831, Retumbo in that...