Trade or Barter- Cases, Bullets,Powder and Primers

RidgeRebel

Active Member
Messages
250
looking for some H110
I have several other powders to trade (H4350, H4831, R22, R17, IMR 4831, R15) or CCI large rifle magnum primers. I am in Southern Utah
 

buckhorn

Very Active Member
Messages
1,833
I have 2 bottles of Retumbo I would trade for H4831sc
in the Reno area

5E679284-08B3-4F30-BA24-C017006CC0BF.jpeg
 

dack77

Active Member
Messages
228
I am looking for some 209 primers.
Where are you located since shipping won't work for me. I am in the SLC area. I have about 5500 shotshell primers that need to go. I am tired of looking at them and will never use them in a million years. I am open to any type of trade for ammo I can use, bullets for reloading in 6.5mm, 308, or .44 bullets, 44 mag brass preferably new, or I will take cash and no I am not looking to get rich off the deal. I think each box of 1k is around $30 at normal pricing and would have been what I paid for them in early 2020.

And since I am sure it will come up, these were bought trying to find a primer that would not cause blowback in my CVA breech plug. It was not easy trying to find different types of primers in the 100 count packages, so I was stuck buying 1k primers. And did you know that if you look hard enough, there is a listing done by someone who had the same problem that had measured each type of primer to show which one was the longest? Yeah I didn't either until after I had a good stash of crap that wouldn't fix the problem :rolleyes: To save people time, Winchester primers measure the longest and fixed all my issues.


20201223_174523.jpg
 

wilydawg

Member
Messages
91
Where are you located since shipping won't work for me. I am in the SLC area. I have about 5500 shotshell primers that need to go. I am tired of looking at them and will never use them in a million years. I am open to any type of trade for ammo I can use, bullets for reloading in 6.5mm, 308, or .44 bullets, 44 mag brass preferably new, or I will take cash and no I am not looking to get rich off the deal. I think each box of 1k is around $30 at normal pricing and would have been what I paid for them in early 2020.

And since I am sure it will come up, these were bought trying to find a primer that would not cause blowback in my CVA breech plug. It was not easy trying to find different types of primers in the 100 count packages, so I was stuck buying 1k primers. And did you know that if you look hard enough, there is a listing done by someone who had the same problem that had measured each type of primer to show which one was the longest? Yeah I didn't either until after I had a good stash of crap that wouldn't fix the problem :rolleyes: To save people time, Winchester primers measure the longest and fixed all my issues.


View attachment 22737
Id be interested in a box of those CCI's PM sent...
 

RINK

Active Member
Messages
172
Where are you located since shipping won't work for me. I am in the SLC area. I have about 5500 shotshell primers that need to go. I am tired of looking at them and will never use them in a million years. I am open to any type of trade for ammo I can use, bullets for reloading in 6.5mm, 308, or .44 bullets, 44 mag brass preferably new, or I will take cash and no I am not looking to get rich off the deal. I think each box of 1k is around $30 at normal pricing and would have been what I paid for them in early 2020.

And since I am sure it will come up, these were bought trying to find a primer that would not cause blowback in my CVA breech plug. It was not easy trying to find different types of primers in the 100 count packages, so I was stuck buying 1k primers. And did you know that if you look hard enough, there is a listing done by someone who had the same problem that had measured each type of primer to show which one was the longest? Yeah I didn't either until after I had a good stash of crap that wouldn't fix the problem :rolleyes: To save people time, Winchester primers measure the longest and fixed all my issues.


View attachment 22737
Dack77,, I reload a ton of those 209s.. I'll take them all.. I'll message to u my info and we can work something out..
 

mtmuley

Long Time Member
Messages
5,284
They don’t know what’s in there. Send it.
Not real smart. The shipper I use had an incident with someone shipping alcohol. Some was damaged in transit and ATF showed up at the shippers business and at the guys house that sent it. That was just over bottled beer. Yeah, go ahead and send it. mtmuley
 

264mag

Long Time Member
Messages
9,606
I was just reading about this, it seems to me to be totally legal they should be sent hazmat which costs roughly an additional 25.00. Maybe I’m wrong? Other guys say they send them ground FedEx
One primer or a thousand your gonna pay for hazmat,ground only
 

COZY25

Member
Messages
85
Anyone have any Vihtavuori N130 that they would part with? I will go through my reloading room and post what I would trade or sell also. I have quite a few powders that I do not use anymore. I have primers and a lot of 6mm leads in various sizes.
 

deadibob

Very Active Member
Messages
2,574
Not real smart. The shipper I use had an incident with someone shipping alcohol. Some was damaged in transit and ATF showed up at the shippers business and at the guys house that sent it. That was just over bottled beer. Yeah, go ahead and send it. mtmuley
Primers aren't packed in glass bottles :LOL:
 

RevXP_09

Member
Messages
23
I have
3lb h1000

2lb 7828 ssc

1 lb 7977

1lb 4831

1lb 4000-mr

2lb 8133

1lb 4350

1lb h4831sc

1lb US 869
500 Winchester wlrm primers
1000 CCI NO. 250 primers
1000 Remington 9 1/2 m primers
1 box Berger 180 gr VLD hunting bullets 7mm
1 box ELD match bullets180gr 7mm
1 box ELD match bullets162gt 7mm
1 box ELD X 175gr bullets 7mm

PM me. I would rather not mess with hazmat and shipping but if somebody wanted a few things maybe we can work something out.

I’m located in western Colorado
 

BridgerMT

Member
Messages
89
154 SHINY pieces of once fired .308 mixed head stamp polished & vacuum sealed brass. Still Primed!!!!!
Im in SW Montana... PayPal Please
IMG_0529.jpeg
 

tailchasers

Long Time Member
Messages
3,702
Anyone with some 30/30 brass available? Got one as a gift and and now it's a safe queen with no ammo available. So working up to reload my own.
 

Homer

Long Time Member
Messages
8,633
remember tailchaser.......no pointed bullets in a tube magazine......and bullets are HARD to find now...even for 30-30
 

BridgerMT

Member
Messages
89
I have 950 rounds of once fired .223 Brass mixed head stamps most is military brass so that means crimped primers swage tool need. Been through the tumbler once so there Shiny...


IMG_0532.jpeg
 

greysriver

Active Member
Messages
257
Looking for 7mm rem mag brass preferably unprimed but once shot would work as well. Along with #215 large magnum primers. Ok if you have any you can part with. I’m in central Utah of that makes a difference. Thanks
 

RINK

Active Member
Messages
172
Hey Greysriver,,,
I have a new box of 20 Winchester ballistic Silvertip 7mm rem mag brand new.. I'll take what they would cost retail is all.. if you're interested.. I live in Sandy, but planning on a trip to see family in Gunnison/Centerfield in a few weeks..

Rink
 

deadibob

Very Active Member
Messages
2,574
Where are you located since shipping won't work for me. I am in the SLC area. I have about 5500 shotshell primers that need to go. I am tired of looking at them and will never use them in a million years. I am open to any type of trade for ammo I can use, bullets for reloading in 6.5mm, 308, or .44 bullets, 44 mag brass preferably new, or I will take cash and no I am not looking to get rich off the deal. I think each box of 1k is around $30 at normal pricing and would have been what I paid for them in early 2020.

And since I am sure it will come up, these were bought trying to find a primer that would not cause blowback in my CVA breech plug. It was not easy trying to find different types of primers in the 100 count packages, so I was stuck buying 1k primers. And did you know that if you look hard enough, there is a listing done by someone who had the same problem that had measured each type of primer to show which one was the longest? Yeah I didn't either until after I had a good stash of crap that wouldn't fix the problem :rolleyes: To save people time, Winchester primers measure the longest and fixed all my issues.


View attachment 22737
A fifty cent o-ring in your breech plug below your primer would have solved all your blow back issues. That's what I use in all my CVA muzzy's.

I believe the chart you're referring to is located on the modern muzzle loader forum.
 

ELKOHOLIC

Very Active Member
Messages
1,395
I have a box of 100 160 gr Sierra Game Kings in .284. I also have a new package of 6.5 Creedmoor brass made by Hornady that I might would part with. I would be interested in ammo in 9mm, 40, or 223. Also looking for small rifle primers. I live in Central Utah.
 

mgd

Member
Messages
47
2C1A79B3-8216-484C-8D5E-6AD4DDE8773B.jpeg

Anyone want to trade some Reloader 22 for Reloader 26? I’d also trade for large rifle primers or large magnum primers. Located in Utah
 

ELKOHOLIC

Very Active Member
Messages
1,395
Looking for 7mm rem mag brass preferably unprimed but once shot would work as well. Along with #215 large magnum primers. Ok if you have any you can part with. I’m in central Utah of that makes a difference. Thanks
Greys, I have some 215’s if you need them. Pm me. I live in Mayfield.
 

RidgeRebel

Active Member
Messages
250
Looking to trade winchester large rifle primers for large rifle magnum primers in St george UT area. Let me know if your interested. Not for sale
 

mtmuley

Long Time Member
Messages
5,284
I have .40 S&W, 10mm and .45 ACP range pick up brass. Stainless tumbled, primers intact. I have it for sale locally, but will ship if it doesn't sell by Sunday. PM me. mtmuley
 

DoubleDropMuley

Very Active Member
Messages
1,002
Anyone have any 22-250 brass to trade for 223! I have 172. 100 Winchester never fired and 72 rem shot once. Don’t have 223 anymore !
 

Desertdeer

Member
Messages
61
I have 100 pieces or brand new starline nickle 308 win brass. 2 50 piece boxes I dont need any longer. I would be willing to trade for powder. Also I have federal 215s I would trade for powder as well
 

dack77

Active Member
Messages
228
I now have what I need to reload for my 44 mag except for the large pistol primers. Wanting a box of 1k primers. I have 1k federal small rifle primers I can trade. I'm in the Salt Lake Valley area.
 

Homer

Long Time Member
Messages
8,633
I now have what I need to reload for my 44 mag except for the large pistol primers. Wanting a box of 1k primers. I have 1k federal small rifle primers I can trade. I'm in the Salt Lake Valley area.
dang, I wish I were closer...
 

Click-a-Pic ... Details & Bigger Photos
Top Bottom