300WSM loads that work for you.

Hey guys, I'm new to this reloading thing. I just bought a new Vortex Viper HS-T scope for my Winchester Model 70 Coyote Lite 300WSM looking to get more accurate at longer range.

My question is what are some loads that you have worked up that work for you. I got a buddy helping me work something up but just wanted some more input.

Thank,


Jake H. BIG BONE HUNTING Page on Facebook.

I settled on 64-grs IMR4350, 180 NAB, Win/Nos brass. I get 2900 and consistent groups. I tried 64.5 of Hunter as well.

RL-17, Win LR Mag primer, Win brass and Barnes TTSX 150 grain bullet sliding along at 3175 fps.
This load has accounted for several deer and even a caribou or two.
Have fun with it!
Zeke

These are what works for my rifle, your mileage may vary due to differences in chambers and barrels:

WLRM primers
Nosler brass
165gr Nosler Accubond
62 gr of IMR 4350
2.87" COAL

WLRM primer
Nosler brass
Hornady 220gr RN
60.6gr of IMR 4350
2.88" COAL

WLRM primer
Nosler brass
220gr Nosler Partition
60.6gr of IMR 4350
2.86" COAL

I have one for the Hornady 165gr Interbond SP, but that load data is at home and I don't have access to it at this time. I do use that load for target practice as the bullets are fairly inexpensive compared to Nosler's stuff.