.300 SAUM loads w/accubonds

[crazyelk]

I will be loading some .300 SAUM. Thus far, I have decided to try some 165 gr. Nosler Accubonds. I also have some H414 powder that I would like to burn. Any good load recipes for these ingredients?

I also welcome any other recommended load recipes for the .300 SAUM.

Thanks...

 

[woodtick]

I loaded some 165's moly coated ACCU's with 62 grs of H4350 spits them around 2900 fps and the accuracy is phenomenal, They shot fair until we found the best seating depth, they went from 1" to under .5" once we found it! I believe our seating depth was around 2.785"
If your lookin to use H414 63 grs is max load in most manuals.
Hope that will get ya headed in the right direction!


TICK
TALL, WIDE, AND HANDSOME

 

[crazyelk]

Woodtick,

By any chance would you happen to know a pet load for the .300 SAUM using 165 gr. Nosler Partitions. I am mostly interested in the C.O.L. (cartridge overall length) for this load as the Nosler reloading manual does not list any tested C.O.L. in thier load data. I am trying to come up with some loads for a Remington 700. Thanks...