Custome wall tent angle kits

[nvnative79]

Does anyone know where I can get some custom angles made for my wall tent? I bought some 120 degree angles but it doesn't fit right. I need more of an angle. Thanks Ryan

 

[hettler]

What size of a tent do you have?

 

[nvnative79]

it is 9'2" by 11'8" with 3'8" walls. It is an old wall tent I need 126 degree side angles and 108 degree angle for the ridgeline.

 

[hettler]

Montana canvas makes an adjustable angle but I can't find any info if it will exceed 120 degrees

 

[thejollyarcher]

I made my own frame out of 1 1/4conduit and used 3/4 square tubing to weld my fittings together.1 1/4conduit slides nicely over 3/4 inch square tubing with a bolt hole drilled through each to pin them together.The whole set up was less than you will pay for the fittings alone.

 

[BLACKDOG]

If your frame is made of 1" EMT conduit then your angled piece is made of 3/4 IMC conduit. You should be able to buy a couple of pieces of IMC and bend it to the anble you want. You can have an electrician do it for you also.
Jeremy