Cutting 777 Pellets

[Lien2]

Has anyone ever tinkered with cutting a 777 pellet in half? I would like to try a 125 grain load in my T/C Triumph, so I would cut a 50 grain pellet in half. Wonder how messy or accurate it would be. Also thinking of switching over to BH 209, but those dang pellets are just so handy I can't get myself to do it.

Lien2

 

[FrontierGander]

Or just buy 30gr pellets and try 130 grains.

Get speed loaders and load the BH209 / bullet into and stop wasting time on pellets.


://frontiermuzzleloadin.powerguild.net/

 

[Lien2]

Advice well taken.
Thank you.

Lien2

 

[hangfire]

I would try the 209 I also have a Triumph, and tried lots of powders, the 209 was by far the most accurate. Give it a try you will be happy you did.

 

[Lien2]

hangfire - How many grains? What bullet out of your Triumph?

Lien2

 

[hangfire]

Lien, I shoot 95 grains of 209 with a 350 grain Hornaday FBP, With 209 the CCI 209M primer works the best.

 

[utahbigbull]

I shoot 115 grain of BH209 with a 325 grain Hornady FTX in a Harvester Crush Rib sabot out of my Triumph and is an awesome load! ++1 on the CCI209M primers.

 

[hangfire]

bigbull, thought about trying that bullet, what harvester sabot you shooting?

 

[utahbigbull]

hangfire, p.m. sent

 

[hangfire]

Thanks for the info.

 

[Lien2]

Good info guys.
Thanks!

Lien2