dirtygrass
Active Member
- Messages
- 623
I have a 2002 Yamaha 660 Grizzly. I rebuilt the carb due to running poorly, after re-installation the Griz started fine and ran great. After a few minutes it started stalling and fuel was pouring out of the overflow tube in the float bowl. I rebuilt the carb after buying a new one and it having the same issue. Im assuming the needle is not seating properly so I adjusted the float level, same issue. The only thing I can think of now is there is debris in my fuel tank which plug to inlet so the needle doesn't seat properly. I have posted this on some ATV forums which didn't really help, hopefully someone on here has an idea.
Thanks,
Dirty
Thanks,
Dirty